Home >> Products >> CARB Bearing
CARB Bearing


CARB toroidal roller bearings are a new type of radial roller bearings. This compact self-aligning roller bearing was developed by SKF and was launched in 1995. The unique design of the bearing combines the self-aligning capability of a spherical roller bearing with the unrestricted axial displacement of a cylindrical roller bearing. It can also have a small cross-sectional area, which is usually the case with needle bearings.


CARB toroidal roller bearing features:
Compact design
The unique internal geometry of the CARB bearing ensures a uniform axial displacement of the load between the roller and the raceway
The axial displacement in the CARB bearing is approximately ±10% of the bearing width
The load between the roller and the raceway is always evenly distributed to achieve optimal operating condition alignment error
CARB bearings allow shaft eccentricity/alignment errors of no more than 0.50


Does not reduce life or increase friction
Average load distribution


Contact Us

Address:Room 1306, Building 7, Xingguang International Financial Center, Development Zone, Liaocheng City
Tel:0635-8263099
        0635-8262099
Email:admin@aglzc.cn

Online Inquiry
Company Name*
Name*
Phone*
E-mail*
Message
Copyright © 2018 - Shandong Ao Gang Lian Bearing Co., Ltd. Technical Support - Bearing.cn ICP:鲁ICP备19054627号-1